Boone and Crockett Club

SCORING YOUR TROPHY
Bison

ON-LINE SCORING STEP ONE - Entering Your Measurements

All measurements must be made with a 1/4-inch wide flexible steel tape to the nearest one-eighth of an inch. Wherever it is necessary to change direction of measurement, mark a control point and swing tape at this point. Enter fractional figures in eighths, without reduction. For example, if a point measures 7 and 2/8 inches, you would enter 7 2/8 in the space provided.

A. GREATEST SPREAD
The greatest spread is measured between perpendiculars at a right angle to the center line of the skull.
Greatest Spread:
B. TIP TO TIP SPREAD
The tip to tip spread is measured between the tips of the horns.
Tip to Tip Spread:
C. LENGTH OF HORN
The length of horn is measured from the lowest point on the underside over the outer curve to a point in line with the tip. Use a straight edge, perpendicular to the horn axis, to end the measurement, if necessary.
Length of Right Horn:	Length of Left Horn:
D-1. CIRCUMFERENCE OF BASE
The circumference of the base is measured at a right angle to the axis of the horn. DO NOT follow the irregular edge of the horn; the line of measurement must be entirely on horn material.
Base of Right Horn:	Base of Left Horn:
D-2-4. HORN CIRCUMFERENCES
Divide Measurement C of the longer horn by four. Starting at the base, mark both horns at these quarters (even though the other horn is shorter) and measure the circumferences at these marks, with measurements taken at right angles to the horn axis.
RIGHT HORN	LEFT HORN
D-2. First Quarter Circumference	D-2. First Quarter Circumference
D-3. Second Quarter Circumference	D-3. Second Quarter Circumference
D-4. Third Quarter Circumference	D-4. Third Quarter Circumference
Congratulations! You have completed the measuring process! Click on the button below to get your final score.

Username:
Password:

Member Login